The flagship models that stands at the top of the Luxman lineup, the C10X with the M10X flagship Pre + power amplifier not only has high-performance preamplifier circuitry that confidently drives the M-10X power amplifier but also has a rich array of functions as a control centre that adjusts the environment of the entire audio system. Turn up the volume and you’ll be captivated by the sense of reality, a spacious sound stage will open up in front of you, filling your space beautifully. These flagship models are the ultimate expression in the art form that is musical reproduction.

Looking ahead to the company's 100th anniversary in 2025, Luxman have returned to the fundamentals of music playback and have finally achieved a LUXMAN milestone, a new generation flagship stereo power amplifier, the M-10X.

The most important innovation is the realization of their new amplification feedback engine “LIFES”, which has been developed and refined through the skillful attention of LUXMAN’s technical team. While based on their traditional ODNF technology, the engineers implemented a fundamental review of the system and every detail from the layout down to individual components which all contribute to a rich musicality, full of vitality.

High performance drivability enhances playback through any speaker system. A beautiful chassis housing design, with blasted white finish, is proudly complimented with proper analog meters. This exquisite flagship model, the M-10X, can evoke what we mean by the true depth of sound, marking the beginning of a new era for LUXMAN.

Overwhelming power linearity

The role of the power amplifier is to faithfully amplify the music signal sent from the control amplifier to the output and drive your speakers accurately while fully drawing out the characteristics of those speakers. With “LIFES” installed in the M-10X and by reconstructing the entire circuit, we succeeded in reducing the number of parallel elements while improving performance and reducing distortion during amplification by half. In addition, the redesigned constant voltage circuitry constitutes a highly stable power supply that fully supports the AC and DC power demands. We have adopted a design that can maintain high performance with more stability. The current amplification stage has a 4x2 output configuration that combines two three-stage Darlington circuits and quadruple paralleled push-pull amplifier circuits that handle various load conditions, and instantaneously develops up to 1,200W+1,200W (1Ω) from a rated output of 150W+150W (8Ω). We have achieved complete power linearity up to 1,200W (1Ω). Along with pure class A operation up to 12W with careful bias current setting, it achieves both overwhelming power and sound quality with a sense of density at a high level.

Analog Meters

The front panel, which has a simple yet elegant design features prominent needle-movement analog level meters. The LED lighting effectively illuminates both meter scale plates, for improved visibility from listening positions. Meter positioning is optimized so that the operational left channel meter is exactly centered and given priority when used in BTL (monaural) listening mode.

The C-10X expresses bold and delicate slanted edges between the chassis and the front panel. The three dimensional and sensual housing design, common to both the M-10X and D-10X, embodies the overwhelming presence and high musicality of a flagship model.

C-10X Pre-Amplifier Specifications

Input Sensitivity / Input Impedance:	Unbalanced: 180 mV / 45 kΩBalanced: 180 mV / 90 kΩ
Output / Input Impedance:	Unbalanced: Rated 1 V / 90 Ω, max. 14.1 VBalanced: Rated 1 V / 180 Ω, max. 28.7 V
Frequency Response:	20 Hz–20 kHz (+0, within –0.1 dB)5 Hz–110 kHz (+0, within –3.0 dB)
Total Harmonic Distortion:	Unbalanced: 0.005% (20 Hz–20 kHz)Balanced: 0.003% (20 Hz–20 kHz)
S/N Ratio (IHF-A):	Unbalanced: 129 dBBalanced: 132 dB
Volume Control:	LECUA-EX
Amplification Feedback Circuit:	LIFES 1.0
Maximum Tone Control Adjustment:	Bass: ±8 dB at 100 HzTreble: ±8 dB at 10 kHz
Remote Control Functions:	Operation, dimmer, input selector
Output Modes:	Unbalanced, balanced, bi-amp
Additional Functions:	Balanced phase switchingChannel preset (balanced phase setting, input level offset setting, bi-amp output level setting)External pre-amplifier inputLine straight, loudness, volume up/down, muteZoom display
Power Consumption:	40 W, 2.6 W (standby)
External Dimensions (W × H × D):	440 × 130 × 434 mm (including 16 mm front knob and 15 mm rear terminals)
Net Weight:	19.8 kg (main unit)
Accessories:	Remote control (RA-20), power cable

M-10X Power Amplifier Specification

Rated Output:	150 W + 150 W (8 Ω) at stereo300 W + 300 W (4 Ω) at stereo600 W (8 Ω) at monaural
Instantaneous Maximum Output:	1,200 W + 1,200 W (1 Ω) at stereo2,400 W (2 Ω) at monaural
Input Sensitivity:	1.24 V / 150 W (8 Ω)
Gain:	29.0 dB
Input Impedance:	Unbalanced: 51 kΩBalanced: 28 kΩ
Frequency Response:	20 Hz–20 kHz (+0, –0.1 dB)1 Hz–130 kHz (+0, –3.0 dB)
Total Harmonic Distortion:	0.003% or less (1 kHz / 8 Ω)0.04% or less (20 Hz–20 kHz / 8 Ω)
S/N Ratio (IHF-A):	117 dB
Amplification Feedback Circuit:	LIFES 1.0
Output Configuration:	3-stage Darlington, 4-parallel push-pull
Damping Factor:	600
Power Consumption:	540 W290 W (no signal)1.0 W (standby)
External Dimensions (W × H × D):	440 × 224 × 488 mm (including 2 mm front knob and 38 mm rear terminals)
Net Weight:	48.4 kg
Accessories:	Trigger cable (modular / 3.5 mm monaural)Power cable
Speaker Terminal Compatibility:	Supported Y-lug terminals:Part A width: 15 mm or lessPart B width: 8 mm or more*Connection may not be possible depending on Y-lug terminal shape

Luxman

Luxman C-10X + M-10X Pre + Power Amplifier